Warren & Baerg Introduces Metering-Surge Bin

Warren & Baerg, Dinuba, Calif., has introduced the Model MSB6-20-O Metering-Surge Bin can be used in the agricultural, biomass and waste industries. This latest generation of metering bin allows operators to load fibrous materials with a front-end loader.

The metering-surge bin provides a consistent, positive and even flow of material for various applications, according to the company. It provides cost-effective metering of shredded or ground woods, stover, grasses, paper, cardboard, plastics, carpet and other similar materials from low rates to well over 100 tons per hour, the company adds.

The metering-surge bin is built with straight side walls or can have a flared front and back walls for additional capacity and loading room.  The flared back is gusseted and supported. There are two doffers up front and a V-Level rake before the top doffer. Depending on the out flow tonnage required, the floor drive motors are 2 horsepower or less and 7.5 hp or less on each doffer. The differences between this bin and existing models is its open for loading with a front-end loader, flared sides for more capacity and loading room, higher discharge flow rates.

For more information, contact Warren & Baerg at 559-591-6790 or info@warrenbaerg.com or visit Warren & Baerg's website at www.warrenbaerg.com.