SIERRA RB6000 AUTOMOBILE LOGGER/BALER

• Powered by a Cummins six cylinder diesel engine
• Hydraulic crane separate from baler with 5,000-pound capacity and boom reach of 26 feet, 3 inches
• Two main compression cylinders with 168-tons of force
• Six box rams with 240 tons of force each side
• Folding box measures 19 feet 8 inches long x 8 feet 1 inch when open
• Bale density of 75 pounds to 90 pounds per cubic foot
• Log density of 25 pounds to 35 pounds per cubic foot
• Weighs roughly 93,000 pounds with three axle trailer

Visit www.sierraintl.com for more information.

SHRED-TECH ST-100 SHREDDER

• Cutting chambers measures 60 inches x 32 inches and 45 inches x 32 inches
• Bulkheads eliminate migration of debris into seals and bearings, increasing durability
• Features electric, gear reduced drives or hydraulic drives
• Knives designed to suit the material for maximum throughputs and optimal shred size
• Control panel with illuminated function buttons, keyed power switch and programmable logic control
• Designed to facilitate parts removal and knife-stack tightening
• Optional features available

Visit www.shred-tech.com for more information. 

AMERI-KART MEGAKART

• Capacity of 96 gallons, 335 pounds
• On-site assembly reduced by 30 percent
• Molded from high-density polyethylene for durability and strength
• Double lip on lid keeps insects out and odor in
• Panels on the lid and sides allow hot stamp identification with numbers and logos
• 12-inch HDPE wheels

Visit www.amerikart.com for more information.

CATERPILLAR WHEELED MATERIAL HANDLER

• Model M325B MH
• New front linkage and cab riser options
• Operating weight of 82,040 pounds
• Net horsepower of 168
• Longer scrap and material handling linkage with reach of 50 feet 10 inches, with a second providing a reach of 43 feet 11 inches
• Quiet workstation with low-effort controls
• Powered by the CatÒ 3116 turbocharged, air-to-air aftercooled diesel engine
• Auxiliary hydraulics designed for material handling applications
• Carrier with four-wheel hydrostatic drive and two-wheel steering

Visit www.cat.com for more information.

TASKMASTER SHREDDER

• Model TM2300
• Twin shaft with drives up to 50 hp
• Split Body design allows for fast and convenient removal of each cutter stack as a complete assembly
• Feature 3.5 inch alloy steel hex shafts
• Heavy two tooth cam cutters
• Input hoppers, stand and automatic reversing controls provided
• Auxiliary equipment includes conveyors, scales and liquid handling systems

Visit www.frankmiller.com for more information.