STANLEY LABOUNTY RCS 80 SHEAR
• Designed to process rebar efficiently and profitably
• For excavators weighing 70,000 to 100,000 tons
• Staggered blades in the upper jaw hold and process rebar as it passes into the lower jaw
• Bolt-on replaceable and indexible blades reduce operating costs
• Large, oversized main pivot for extreme duty cycles
• Does not require additional hydraulics
Visit www.stanley-hydraulic-tools.com or call 800-522-5059 for more information.
CATERPILLAR 345C MATERIAL HANDLER
• Replaces the 345B II material handler and offers greater lifting capacity and increased horsepower
• Powered by the Cat C13 engine with ACERT Techology that produces 345 hp and features electronic controls and the Cat EUI fuel system
• Features oil and filter change intervals of 500 hours
• Uses the open-center, two-pump, negative-flow hydraulic system
• Equipped with a standard reach of 54-feet, 2-inches, but an optional 59-foot reach is available
• Features implement circuits designed specifically for material handling
• A separate fixed displacement pump runs an optional 25 kW generator needed to operate a magnet as large as 72 inches
• Includes a quiet cab with ergonomic control placement and convenient adjustments
Visit www.cat.com, e-mail catleads@jacksongroup.com or call your local Cat dealer for more information.
SHRED-TECH MDS-35GT
• A mobile document destruction system capable of processing up to 8,000 pounds per hour in a variety of particle sizes
• Can be installed on a single- or tandem-axle chassis and allows for a maximum legal payload capacity of up to 10,000 and 19,000 pounds
• Constructed entirely of aluminum and has undergone 10,000 hours of extreme environment and destructive testing
• Includes a three-year limited warranty
• Equipped with extreme environment, interactive PC-based controls and an ultra-high resolution LCD monitor
Visit www.shred-tech.com, e-mail shred@shred-tech.com or call 800-465-3214 for more information.
HAGGLUNDS GEMINI SYSTEM
• New compact hydraulic motor design and drive system
• Features the Compact CBP motor series, which offers a wider range of speeds and output power in excess of 1,500 hp
• Motor includes a through hole to accommodate a shaft or fluid tube
• Gearless motor mounts on the shaft, eliminating gearboxes, clutches or foundations
• Suitable for conveyors and pre-shredders
• Built on a modular concept and offers flexible construction possibilities
• Designed to withstand harsh enviroments with heat and humidity extremes
Visit www.hagglunds.com for more information.
YOUNG ORANGE PEEL GRAPPLES
• Four-tine grapples designed for handling scrap metal, refuse, demolition debris
• Feature 360-degree, high-torque rotation
• Five-tine grapples have non-rotating head and rugged alloy steel tines
• All bearing bolts are accessible from the top of the grapple for ease of service
• Include replaceable, abrasion-resistant tips
• Hydraulic cylinders feature heavy cylinder walls, oversized rods, heavy rod shrouds and hydraulic cushions to absorb shock
• Options include knock-around rotation, fully enclosed tines, tine-reinforced plates and standard and special crossheads that fit booms from other manufacturers
Visit www.youngcorp.com or call 800-321-9090 for more information.
BAYNE BTL 208 RHK CART LIFTER SERIES
• Designed for semi-automated rear- and side-load-
ing refuse collection vehicles
• Patent-pending design features a rotating hook
that picks up and secures the cart to the lifter
• Spring-operated rotating hook compensates for
cart variation, preventing excessive pressure
from being exerting on to carts or lifter
• Cam drive prevents premature unlatching and
dropping of carts
• Includes two standard adjustable faceplate angles to fit a range of mounting heights and configurations
• Features a 10-second cycle time
• Powered by Bayne’s Thinline rack-and-pinion rotary actuator for greater lift capacity, lower operating pressures
Visit www.baynethinline.com or call 800-535-2671 for more information.
Explore the June 2005 Issue
Check out more from this issue and find your next story to read.
Latest from Recycling Today
- Buy Scrap Software to showcase its software at Scrap Expo in September
- LG details recycling activities
- Algoma EAF is up and running
- Toyota-Tsusho completes acquisition of Radius Recycling
- CATL, Ellen MacArthur Foundation aim to accelerate circular battery economy
- Commentary: Expanded polystyrene is 98 percent air, 2 percent plastic and 100 percent misunderstood
- AMCS appoints general manager for North America
- How tariffs, regulations affect LIBs recycling in US, EU
