Catching the Drift

Nickel pricing, which at times has soared during the past several years, has experienced a downward drift in 2012. Perhaps more troubling for processors and traders of nickel-bearing scrap, however, is that demand for stainless steel scrap from China—the world’s largest metals producer—has been muted because of high levels of nickel pig iron being produced there.

Several traders and recyclers pointed to these market conditions when offering reports at the 2012 Bureau of International Recycling (BIR) World Recycling Convention.

As the second half of 2012 begins, it is uncertain to what extent global economic conditions will provide any boost to a recycling industry sector that, while not lacklustre, could use some revitalization.

A slower sector
At the May 30 meeting of the BIR’s Stainless Steel & Special Alloys Committee in Rome, traders such as Barry Hunter of Hunter Alloys LLC, Boonton, N.J., pointed to both slow scrap flows and slack demand as concerns.

“Flows of scrap into wholesale yards remain slow,” said Hunter, who cited low industrial production and some scrap dealers holding inventory awaiting higher prices. On the scrap demand side, Hunter stated, “Stainless scrap requirements for April mill deliveries were reduced and May requirements have already indicated a continued reduction in demand.”

Demand from China remains muted. “There continues to be abundant supplies of nickel-bearing pig iron at cost-effective prices” in that nation, according to Mark Sellier, who works from the Hong Kong office of OneSteel Recycling.

While Frank Waeckerle of Cronimet’s Germany office said “demand for clean and homogenous scrap out of processing plants is high” in Germany and some neighboring countries, there also is plenty of worrisome news out of Europe.

“Scrap availability seems to become poorer,” reported Sandro Giuliani of Italy’s Giuliani Metalli. As did Hunter, Giuliani cited “a decrease in manufacturing activities” and that “dealers are reluctant to sell the scrap they have stored at higher values.”

Committee chairman Michael Wright, who works in the United Kingdom for ELG Haniel GmbH, reported slower melting schedules in the U.K. and “a fall in stainless steel scrap availability” similar to the conditions spelled out by Hunter and Giuliani.

A nickel’s worth
The recent story of the price of nickel on the London Metal Exchange (LME) has been one of a downward trend.

In the less-than-18-month span from February 2011 to May 2012, the per-tonne cash settlement value of nickel on the LME has taken the following path:

As speakers at the BIR session indicated, there seem to be several supply-and-demand-related reasons for the fall in nickel pricing.

On the supply side, the historically high pricing reflected in the February 2011 LME nickel price helped spur production of the Chinese nickel pig iron mentioned by Sellier as well as boosting mining activity around the world.

Some scaling back of mining activity may be occurring as of mid-2012. A Reuters news item in early July reported that Vancouver-based CaNickel Mining Ltd. is keeping its operations at the Bucko Lake Nickel mine in Manitoba in suspension because of low prices.

The site also has been the subject of a provincial engineering review and audit, but in announcing the ongoing suspension of operations, CaNickel also pointed to nickel prices that have fallen in 2012 as a reason to forego resuming operations.

Chinese nickel pig iron, produced from laterite nickel ore, has been supplying stainless steel mills in that nation with considerable feedstock since 2006. “Chinese stainless steel producers use nickel pig iron, to which they will add chromium and other materials, to produce 200- and 300-series stainless steel, which accounts for more than 70% of total stainless steel production in China,” says China Steel Australia Limited on its website.

While this material has greatly curtailed the demand for imported stainless steel scrap in China for the past several years, the reservoir of nickel pig iron may be draining quickly. The China Steel Australia Limited write-up goes on to say, “With the Chinese Government Steel Industry Restructuring Program, many nickel pig iron producers have been shut down due to poor environmental standards,” and that “Chinese domestic growth demand for nickel and nickel pig iron far exceeds the increase in production of nickel in China over the next few years.”

China Steel Australia Limited adds that its Linyi nickel pig iron plant “is environmentally certified,” and that “with demand still growing at a rapid rate and supply of nickel pig iron being substantially reduced, demand for nickel pig iron from producers like China Steel is very strong.”

Still somewhat demanding
While demand in China for both finished stainless steel and mill feedstock may be strong, demand in other parts of the world has been less vigorous.

Finland-based stainless steel producer Outokumpu Oyj said its 2012 first quarter could be characterized by “improvement in profitability [as] a result of higher delivery volumes” but that “a somewhat weaker mix had an adverse effect.”

As the company looked back on its first quarter in its accompany news release, it also warned investors of a potentially disappointing second quarter. “As a result of the recent decline in the nickel price and a weaker product and geographic mix in the second quarter, Outokumpu’s average base prices for stainless steel in the second quarter are expected to be flat or slightly lower than in the first quarter,” states the company.

Spain-based Acerinox Group also enjoyed a profitable first quarter of 2012. In its accompanying comments, the company pointed to “recovery of the American market [that] has allowed us to maintain our optimism in spite of the weakness of the European market.”

Results from the company’s North American Stainless subsidiary in the United States have been encouraging, reports Acerinox. “The United States market is in a clear recovery process since the month of November and continues to be the most solid one,” reported Acerinox CEO Bernardo Velázquez in a late April news release. “We had already mentioned that some indicators, such as the sales of trucks or investments in energy plants had improved, but now we can say that practically all sectors—even those related to construction, such as sinks or white goods—are in sound recovery, and the feeling of our customers and sellers is optimistic. This situation is favouring North American Stainless, which is performing even better than the market and reaching high level of competitiveness,” added Velázquez.

The company’s view of its home European market was far less favorable. “The apparent consumption of the European market has decreased 3% with respect to the first quarter of 2011, as per preliminary data from Eurofer,” stated Velázquez. “The lack of confidence in the face of the economic and financial situation, in addition to the scarce visibility and the forecast of declining prices due to the fall of alloy extras, has caused [a de-acceleration] of stainless steel consumption.”

The second quarter of 2012 has remained a good news-bad news see-saw, as investors and metals producers alike try to determine whether each new bit of economic data is the key one that will determine the direction of the economy.

A demand index calculated by the International Stainless Steel Forum (ISSF), Brussels, shows an upward trend for finished stainless steel since early 2010.

After the index (which uses 2005 as its baseline 100 figure) dipped from approximately 125 down to 115 between mid-2008 and mid-2009, it has been moving upward, reaching into the 160s by the beginning of 2012.

That trend line could explain that even while companies like Outokumpu and Acerinox have concerns about the future of the Eurozone, they can take comfort in being part of a growing industry sector.

As Pascal Payet-Gaspard, secretary general of the ISSF, told BIR delegates in Rome (see Sidebar “Hitting the Century Mark” on page 29), growing applications like the bio-energy sector cause him to state “despite current difficulties shared by many heavy industries, the stainless steel industry has a bright future.”

The author is editorial director of Recycling Today Global Edition and can be contacted at btaylor@gie.net.