Home News August Rebound is Sizable for Ferrous Scrap

August Rebound is Sizable for Ferrous Scrap

Ferrous

RMDAS spot market pricing moves up $60 to $70 per ton, regaining ground lost in June and July.

Recycling Today Staff August 21, 2012

After two months of falling prices, ferrous scrap processors and shippers received a healthy amount more for the grades they shipped to steel mills in August.

According to the monthly averages issued by the Raw Material Data Aggregation Service (RMDAS) of Pittsburgh-based Management Science Associates (MSA), domestic mills buying on the spot market in early August paid anywhere from $56 to $82 more per ton than they had the previous month (depending on the grade of scrap and the market region).

Both the RMDAS prompt industrial composite (consisting of No. 1 busheling, No. 1 bundles and No. 1 factory bundles) and the No. 2 shredded scrap grade moved back up to more than $400 per ton, after slipping beneath that benchmark in July.

Shredded scrap in the North Midwest region (consisting of Illinois, Iowa, Kansas, Minnesota, Missouri, Nebraska, Wisconsin, the Dakotas and the northwest corner of Indiana) enjoyed the single largest price recovery, gaining $82 per ton in value in August.

Spot market prices for No. 1 heavy melting steel (HMS) remained below $400 per ton, although the August price recovery helped move the value of the grade nationally from $308 per ton in July to $368 in August.

Although the August price jumps helped processors sell their scrap for a higher price than in the previous two months, pricing did not fully return to the May 2012 levels. Using national spot market averages, pricing for each of the three major grades tracked by RMDAS remains about $30 per ton less than the May figures.

A Midwestern scrap recycler contacted in mid-August said a lot of material moved through his company’s facilities in August as smaller dealers moved their inventory in response to the rising prices. “Dealers needed to recoup [what they lost in June and July] and they sold a lot of scrap with this price swing,” he comments.

A trader based in the Northeast said the bidding for scrap has become competitive again, with both export brokers and domestic mills placing consistent orders for material.

On the generation side, while smaller dealers have helped provide much-needed supply, it is needed in part to make up for the lagging construction and demolition sectors. “Demolition activity is flat right now,” says the Midwestern recycler. “The spring jobs are winding down and there are very few new jobs starting up right now.”

The Midwestern processor says he does not anticipate another wild price swing in the September buying period. “I think we’ll see a narrow range, with prices maybe having room to grow by another $20 per ton or so,” he comments.

He says the August rebound was a welcome development for scrap recyclers. “August is going to help us out,” he says. “There have been some tough months in 2012, either because of lighter scrap flows or tough margins. I think the year is going out on a positive note. Volumes have increased and prime grades are above $400 per ton—that’s not bad.”

Steel mill output in the United States has remained relatively consistent throughout the volatile three-month period. According to the American Iron and Steel Institute (AISI), Washington, D.C., in the week ending Aug. 11, 2012, domestic raw steel production was just under 1.9 million net tons with a capability utilization rate of 76.9 percent. That compares with production of 1.85 million tons in the week ending Aug. 11, 2011, when the capability utilization rate was 75.7 percent.

As well, the Aug. 11, 2012, weekly production was up 1.9 percent from the previous week (ending Aug. 4, 2012), when output was 1.86 million tons and the capability utilization rate was 75.4 percent.

Year-to-date, according to AISI, U.S. steel output of 61.37 million tons is demonstrating a 5.7 percent increase from the 58 million tons made during the same period in 2011.

“Mills are still running well; they need scrap,” says the Midwestern scrap recycler. Regarding export buying, he says “China is slow, [but] buyers from India are stepping up a little bit.”

The Raw Material Data Aggregation Service (RMDAS) Ferrous Scrap Price Index is based on data gathered from a statistically significant compilation of verified ferrous scrap purchase transactions.

RMDAS is a service of Management Science Associates Inc. (MSA), Pittsburgh. Those seeking more information about RMDAS can contact MSA’s Jeralyn Brown at 724-265-6574 or via e-mail at JBrown@MSA.com.
 

Sponsors

Current Issue

Follow us on Twitter
Follow us on LinkedIn
x